A terrace or driveway made of exposed aggregate concrete is not only stylish but also exceptionally durable. However, it’s important to properly maintain this type of concrete and protect it from dirt, moisture, and algae growth. In this article, you’ll learn, step by step, how to properly clean and seal exposed aggregate concrete for long-lasting, beautiful results.

Why does exposed concrete get dirty?

Exposed aggregate concrete is naturally porous. This means that its surface contains small open pores into which water and dirt can easily penetrate.

What exactly is happening?

When rainwater or moisture seeps into these pores:

  • Does the water remain in the concrete for a longer period of time?
  • Ideal conditions for algae, moss, and mold are created
  • Do dirt particles adhere to the surface more quickly?

Over time, this leads to:

  • Green deposits
  • Dark spots
  • A dated and dirty appearance

Why protect exposed concrete?

Exposed aggregate concrete has an open texture because the cement paste has been removed, leaving the aggregates visible. This gives the surface:

  • More prone to dirt and stains
  • Prone to green growth (algae and moss)
  • Less resistant to moisture penetration

By treating your patio or driveway, you’ll extend its lifespan and keep the surface looking clean for longer.

Step 1: Cleaning to remove green deposits

If you notice green mold on your patio or driveway, a thorough cleaning is essential before you apply a protective coating.

For that, you can use our green deposit remover Guard Wash Express :

  • Removes green deposits and organic dirt
  • Penetrates deep into the pores of the concrete
  • Ready to use and easy to apply

How to use it?

  1. Lightly dampen the surface
  2. If necessary, dilute and apply using a low-pressure sprayer
  3. If necessary, gently scrub to remove stubborn dirt
  4. Let it sit for at least 30 minutes (or longer if desired)
  5. Rinse with a garden hose or pressure washer from a safe distance

Step 2: Protect with a wood preservative

After cleaning, it is crucial to protect the concrete from new contamination and moisture.
For this purpose, use IN2-Protect Basic. IN2-PROTECT Basic is a powerful water repellent that makes the surface water-resistant and prevents the concrete floor from absorbing water.

Why use a wood preservative?

  • Makes the surface water-repellent, so that green deposits form much less quickly
  • Reduces dirt buildup
  • Protects against frost damage
  • Extends the service life of the concrete

How do I apply it?

  1. Make sure the surface is completely dry
  2. Apply the product in a single coat using a low-pressure sprayer
  3. Let the product soak in
  4. Protect the floor from rain for 24 hours
  5. Maximum efficiency after 7 days

What is quartz aggregate?

Quartz aggregate is a dry mixture of cement, quartz sand, and, if desired, pigment, used to harden, color, and increase the wear resistance of concrete floors. It is scattered over fresh concrete and then worked into the surface.

What is the standard composition?

The standard ratio is:

  • 1 part cement
  • 2 parts quartz sand

This ratio provides a good balance between workability, wear resistance, and strength.

How do you add pigment ?

Pigment is added to give the bedding layer its color.

  • Dosage: approximately 5% of the cement weight
  • Always calculate based on the cement, not on the total mixture

Tip: Mix the pigment with the cement while dry first to ensure even color distribution.

Example: calculation for 25 kg of mixture

Below is an example of how to make 25 kg of bedding quartz.

The ratio is 1:2 → total = 3 parts

  • Cement = 1/3 of 25 kg = 8.33 kg
  • Quartz = 2/3 of 25 kg = 16.67 kg

Pigment = 5% of the cement weight

  • 5% of 8.33 kg = 0.42 kg (≈ 420 grams)

Final mixture:

  • Cement: 8.33 kg
  • Quartz sand: 16.67 kg
  • Pigment: 0.42 kg

Total weight ≈ 25.4 kg (slightly higher due to pigment)

How do you properly mix quartz aggregate?

  1. First, mix the cement and pigment while dry
  2. Then add quartz sand
  3. Mix until a homogeneous, uniform dry mixture is formed

When should you use quartz aggregate?

Filler quartz is used in:

  • To color concrete
  • Homes, patios, driveways
  • Industrial concrete floors
  • Warehouses
  • Workshops

It increases:

  • Wear resistance
  • Compressive strength
  • Lifespan of the floor

No. Concrete cannot be completely protected against acids.

Concrete is naturally a basic (alkaline) material because cement contains calcium compounds. When an acid—such as vinegar, lemon juice, or descalers —comes into contact with concrete, a chemical reaction occurs between the acid and the cement.

This reaction affects the surface of the concrete and usually causes:

  • dullness or lighter spots
  • light etching of the surface
  • loss of shine on polished concrete floors

Do protective products help against acids?

Protective products such as impregnations or sealers can protect concrete against:

  • water
  • dirt
  • fats and oils

They make the surface less porous and ensure that liquids penetrate less quickly.

However, they cannot fully protect concrete against acids.
This is because acids react with the cement itself, and not just with the pores of the material.

What can you do?

Although you cannot make concrete acid-resistant, you can take a few precautions:

  • Remove acidic liquids immediately
  • Avoid prolonged contact with products such as vinegar, descalers, or acidic cleaners.
  • Preferably use pH-neutral cleaning products for daily cleaning.

This minimizes the risk of surface damage.

Dull spots that appear after contact with vinegar or other acids are not actually stains, but surface damage to the concrete.

Concrete is naturally alkaline (basic). When an acid such as vinegar, lemon juice, or descaler comes into contact with the surface, the acid reacts chemically with the cement in the concrete. This causes slight damage or etching to the surface, which is visible as a dull spot or lighter area.

Do cleaning products work on these stains?

No. Because it is not dirt but chemical damage to the surface, ordinary cleaning products or degreasers will not remove these stains.

What can you do?

The only way to improve the appearance is to lightly repolish the surface.

This can be done by working locally with polishing pads to:

  • to smooth the surface again
  • partially restore the shine
  • make the difference with the surrounding floor less visible

Depending on the severity of the damage, the result may vary.

Can you protect concrete from acids?

No. Concrete is a basic material, while vinegar and other acids are acidic. Due to this fundamental chemical contrast, acids will always react with concrete and thus cause damage.

Protective products can help protect the surface against dirt and moisture, but no product can make concrete completely acid-resistant.

When applying a curing compound to concrete, a fine mist may sometimes land on surrounding surfaces, such as windows or glass. After drying, this mist can leave a haze or stains on the glass.

Fortunately, this is usually quite easy to remove.

Solution 1: Use IN2-STRIP

To remove curing residues, you can use IN2-STRIP . This product has been specially developed to remove curing products from surfaces.

How to use on glass:

  1. Apply a small amount of IN2-STRIP to a cloth or sponge.
  2. Gently rub the curing stains on the glass.
  3. Allow the product to work briefly if necessary.
  4. Rinse or clean the glass afterwards with water and a clean cloth.

Please note: IN2-STRIP was originally developed for concrete floors. Therefore, use it sparingly and, if possible, test it on a small area first.

Solution 2: Washing gasoline

An alternative that often works well is white spirit. This product can usually dissolve curing residues as well.

Usage:

  1. Apply a small amount of benzine to a soft cloth.
  2. Gently rub the curing stains.
  3. Clean the glass afterwards with a regular glass cleaner.

Washing gasoline is usually readily available in DIY stores and can be a cheaper alternative.