IN2-DENSIFY - L

Application
  • For old and new concrete floors
  • Hardened concrete floors
  • Makes concrete floors dust-free
  • Makes maintenance easier
  • CALCULATE THE AMOUNT YOU WILL NEED:

    From  17,44 excl. VAT

    Always on stock
    Buy [nextvalue] and save 15% per L
    Make a choice:
    technical information:

    Article code:

    IN2-DENSIFY Lithium is a water-based and concentrated lithium silicate used to harden cement surfaces. Lithium hardener is ideal for large to very large surfaces due to its minimal workload.

    The silicate reacts with the cement components and forms an insoluble calcium silicate hydrate (CSH) that increases surface hardness, reduces dust and facilitates maintenance.

    Unlike coatings and sealers, the top layer will not peel or soften and is immune to moisture.

    Use IN2-DENSIFY Lithium to compact, harden and dust-proof new and existing concrete surfaces.

    USER MANUAL

    For new floors you can apply IN2-DENSIFY L the day after flatting without pretreatment. If the floor was covered with foil, curing, stucloper, etc., you must first clean it well with IN2-CLEAN. The curing compound must be completely dissolved or can be removed with IN2-STRIP.

    Spray IN2-DENSIFY L onto the surface until it no longer absorbs anything. Be sure to spread well, be sure not to leave puddles. Allow the product to dry for 12 hours. Do not proceed with sanding or polishing until the surface is completely dry.

    Consumption: 5-15m²/L (depending on the porosity of the surface)

    Suitable for:

    - New concrete floors
    - Old concrete floors
    - Floated concrete floors
    - Polished concrete floors

    Product data sheet
    MSDS NL

    MSDS ENG

    TDS FR
    MSDS FR

    Weight N/A
    Dimensions N/A
    Packaging

    1L, 10L, 20L, 200L, 12x20L, 24x20L, 1000L