IN2-PRINT Sealer

Application
  • Sealer for Stamped concrete
  • Suitable for fresh concrete
  • Can be applied 1 day after placing the concrete
  • With semi-gloss effect
  • CALCULATE THE AMOUNT YOU WILL NEED:

    From  184,84 excl. VAT

    Always on stock
    Buy [nextvalue] and save 15% per L
    Make a choice:
    [yith_wcwl_add_to_wishlist product_id="14114"]
    technical information:

    Article code:

    Water and oil repellent sealer for Stamped concrete

    IN2-PRINT Sealer is a water and oil repellent sealer for Stamped concrete that protects the surface from water and oil stains and gives the surface a deep, intense colour. It is UV-resistant and does not yellow over time.

    IN2-PRINT Sealer is geschikt voor jong beton (<28 dagen oud) en kan meteen na het uitharden van het printbeton aangebracht worden.

    IN2-PRINT Sealer can also be used to re-protect existing Stamped concrete . We recommend IN2-PRINT Sealer reapplication every 2 years.

    HOW TO USE

    Clean and dust the surface with water. Apply the sealer with a roller or low-pressure sprayer and allow to dry.

    Apply two coats. Allow the product to soak in and dry for 15 to 30 minutes, then apply the second coat. Do not over apply, all product must be completely absorbed into the surface.

    USE

    6 to 10m² per litre (consumption for 2 layers)

    Weight N/A
    Dimensions N/A
    Quantity

    5L, 20L, 6x20L (1/4th pallet), 12x20L (1/2th pallet), 24x20L (Full pallet)