IN2-PROTECT Extreme

IN2-Protect Extreme is the very best protection for concrete floors. In this impregnation treatment, the floor is first treated with IN2-Protect+ and then with IN2-Protect Intense.

IN2-Protect+ is a CE-certified impregnating agent with very small molecules that penetrate very deeply into low-porous and compacted surfaces such as floored and and polished concrete surfaces.

IN2-Protect Intens is an impregnating agent with larger molecules that remains more on the surface and seals the pores very well. On untreated concrete floors, IN2-Protect Intens has a color deepening effect. In combination with IN2-Protect+ in this application, the color diluting effect is much smaller.

The combination of the two products provides exceptional protection for outdoor floors and delicate concrete surfaces. Outdoor floors such as driveways and patios are affected much more quickly by acid rain, wind, freeze/thaw cycle, etc. As a result, the top layer can wear away and the floor becomes dusty and porous. If there is dye infused into the top coat, the color can wear away. IN2-Protect Extreme is also very suitable in wet indoor areas such as bathrooms, toilets and showers.

APPLICATION

IN2-Protect Extreme is recommended for outdoor floors (terraces), concrete surfaces in stain-sensitive environments (e.g., (kitchen) countertops, café eyes, parking garages, graffiti shops, commercial stores, warehouses, etc.).

HOW TO USE?

Make the surface completely clean, dust and grease-free.

1. Application of IN2-PROTECT+

Spray IN2-Protect+ in a thin layer over the surface with a low-pressure sprayer and immediately rub open well with a microfiber cloth or mop. Apply in two coats (once lengthwise and once widthwise). Afterwards, allow the surface to dry.

2. Apply IN2-PROTECT INTENSE

Apply IN2-PROTECT Intense in a thin layer with a roller. Allow to dry for 5-10 minutes and then polish the surface with a microfiber cloth (very important!!). Make sure all product is nicely incorporated and remove all excess product with the microfiber cloth.

USE

IN2-PROTECT+: 15-30m²/L (for two coats, depending on the porosity of the surface). The smoother flattened or more polished, the lower the consumption.

IN2-Protect Intense: 15-25m² / L (one coat, depending on the porosity of the surface)