IN2-PROTECT+

Application
Suitable for all concrete.
Suitable for floors and facades.
For new floors, apply after 28 days.
Can be applied earlier if moisture percentage is lower than 8%.

CALCULATE THE AMOUNT YOU WILL NEED:

From  50,12 excl. VAT

Always on stock
Buy [nextvalue] and save 15% per L
Make a choice:
technical information:

Article code:

Impregnating agent for concrete

IN2-PROTECT Plus is the leading oil-repellent stain stopper or impregnating agent specifically developed for impregnating concrete and terrazzo floors. It is a certified product according to the EN 1504-2 class II standard and penetrates up to 10 mm or deeper.

It provides protection against stubborn oil and water-based stains. It is a penetrating sealer that does not form a topcoat and does not change the appearance of the concrete or terrazzo.

IN2-PROTECT Plus is much more concentrated than IN2-PROTECT and contains a much higher proportion of active ingredient, making it much more effective.

CONSUMPTION: 15-30 m²/L (depending on the porosity of the substrate and finishing method)
Finished concrete: 15-20m²/L
Polished concrete: 22-30m²/L

USAGE: Apply to a clean, dust-free and dry surface. Use clean, do not dilute. Shake product well before use. Apply with a low-pressure sprayer and spread evenly with a mop. Treat the surface until it is saturated. Drying time: 24 hours. Maximum effectiveness after 7 days. Clean the floor with IN2-CLEAN.

PDS EN
PDS ENG
PDS FR

MSDS Netherlands
MSDS Belgium NL
MSDS Belgium FR
MSDS France FR
MSDS UK English

Weight N/A
Dimensions N/A
Packaging

1L, 5L, 10L, 20L, 200L, 12x20L, 24x20L, 1000L

Reviews

There are no reviews yet.

Be the first to review "IN2-PROTECT+"

Your email address will not be displayed. Required fields are marked with *