IN2-COLOR

Application
  • Permanent concrete stain for colouring concrete floors
  • For indoor use only - not UV resistant
  • CALCULATE THE AMOUNT YOU WILL NEED:

    From  38,35 excl. VAT

    Buy [nextvalue] and save 15% per L
    Make a choice:
    technical information:

    Article code:

    IN2-COLOR is a permanent concrete stain for indoor use that instantly colors concrete and stone and penetrates deep into the surface. You can use it to color entire surfaces, lines, safety icons, company logos, etc., in concrete or to deepen the color of concrete floors and make them nice and even. Note: not UV-resistant and fades by sunlight, suitable for indoor use only.

    USER MANUAL

    After polishing, clean and dust the floor completely. Tape the edges well and make sure there is enough margin. IN2-COLOR Penetrates immediately, so stains are impossible to remove afterwards.

    Apply IN2-COLOR Apply manually or with a Sprayer . Spread evenly with a sponge, rag or microfiber mop.

    Remove the excess product with a rag or a machine with low rotation and a wet diamond pad. Let the product dry for a few minutes. You can see the end result immediately. Then harden the floor with IN2-DENSIFY and impregnate it with IN2-PROTECT+.

    If you want to colour shapes or logos, we recommend using non-permanent adhesive stickers in which the shape is cut out and with a 10 cm safety edge to prevent staining.

    Consumption: 10 - 20 m²/l (depending on the porosity of the surface)

    PDS IN2-Color (EN)
    PDS IN2-Color (ENG)
    MSDS NL
    MSDS BE-NL
    MSDS BE-FR

    Weight N/A
    Dimensions N/A
    Colour

    BLACK, BROWN, GREY, RED, BLUE, GREEN

    Packaging

    1L, 5L