GraffiGuard® 2010

Application

Graffiguard 2010 is a special cleaning product for spectra and rings of graffiti.

  • GraffiGuard 2010 removes ink stains and residue left after cleaning graffiti. It is ideal for removing residual rings and spectra after using GraffiGuard 2030 Eco
  • Prevention: for a long-lasting result, we recommend to protect the surface with a suitable sealer from the Guard Industry range.

For use on:

  • facades, walls and fences of new and renovated buildings, etc.

Ideal for cleaning:

  • concrete, bricks, natural stone
  • concrete, brick, natural stone, etc.

GraffiGuard 2010 can also be used to remove graffiti on surfaces protected with AntiGraffiti Guard Special Concrete and ProtectGuard Color Two Component.

Application:
  • Shake the bottle well before use.
  • Use the product in its pure form, not diluted.
  • Always perform a test before application.
  • Apply GraffiGuard® 2010 to the surface to be treated with a brush and circular movements.
  • Wait about 2 to 10 minutes.
  • Rinse thoroughly with low pressure and hot water.
  • Rinse with cold water to neutralise.
  • Clean the equipment with water immediately after use.

Consumption:
Use 1L of GraffiGuard® 2010 to treat an area between 3 and 5 m².

These averages serve only as an indication.

Safety data sheet
Technical data sheet

Medical safety data sheet
Technical data sheet

Technical sheet
Safety data sheet

CALCULATE THE AMOUNT YOU WILL NEED:

m²

€ 73,92 excl. VAT

Buy [nextvalue] and save 15% per L
Make a choice:
technical information:

Article code:

Graffiguard 2010 is a special cleaning product for spectra and rings of graffiti.

  • GraffiGuard 2010 removes ink stains and residue left after cleaning graffiti. It is ideal for removing residual rings and spectra after using GraffiGuard 2030 Eco
  • Prevention: for a long-lasting result, we recommend to protect the surface with a suitable sealer from the Guard Industry range.

For use on:

  • facades, walls and fences of new and renovated buildings, etc.

Ideal for cleaning:

  • concrete, bricks, natural stone
  • concrete, brick, natural stone, etc.

GraffiGuard 2010 can also be used to remove graffiti on surfaces protected with AntiGraffiti Guard Special Concrete and ProtectGuard Color Two Component.

Application:
  • Shake the bottle well before use.
  • Use the product in its pure form, not diluted.
  • Always perform a test before application.
  • Apply GraffiGuard® 2010 to the surface to be treated with a brush and circular movements.
  • Wait about 2 to 10 minutes.
  • Rinse thoroughly with low pressure and hot water.
  • Rinse with cold water to neutralise.
  • Clean the equipment with water immediately after use.

Consumption:
Use 1L GraffiGuard® 2010 to treat an area between 3 and 5 m².

These averages serve only as an indication.

MSDS NL
TDS NL

MSDS ENG
TDS ENG

Technical sheet
Safety data sheet

Weight N/A
Dimensions N/A
Packaging

2L

Related Products