IN2-DENSIFY Color

IN2-DENSIFY COLOR is a penetrating silicate paint for staining concrete floors. It does not form a fully covering layer on the surface, but is a non-film-forming product that penetrates the concrete and allows the surface to breathe. Thus, the surface still allows air and water vapor to pass through. It is geschkt for floors at least 28 days old.

IN2-DENSIFY COLOR is a semi-transparent paint that preserves the natural look of concrete. Coverage depends on the Amount applied coats.

CONSUMPT
5 to 10 m² / L. Consumption for 2 coats, depending on the porosity of the surface.

INSTRUCTIONS FOR USE
Make sure the surface is thoroughly dry, dust and grease-free. Clean the surface with IN2-SURFACE Prep to properly open the pores. Remove any grease stains with IN2-STRIP. Allow the surface to dry thoroughly for about 24 hours. Shake or mix the product very well until homogeneous. Always test on an inconspicuous area first. Use pure, do not mix with other products. Apply 2 or up to 3 coats depending on desired coverage. Apply with HVLP Sprayer or roller and distribute afterwards with a microfiber mop if necessary. Always allow to dry thoroughly (+- 1 hour) and re-mix the product between each coat.

PDS EN

PDS ENG

PDS FR