IN2-DENSIFY L Basic

Application

From  135,48 excl. VAT

Make a choice:
technical information:

Article code:

LITHIUM HARDENER FOR CONCRETE FLOORS

IN2-DENSIFY L Basic is a lithium hardener for concrete floors with 6% active ingredients that hardens the floor, reduces dust and makes maintenance easier.

Lithium hardener is ideal for large to very large areas due to its minimal working load.

Unlike coatings and sealers, the top coat will not peel or soften and becomes immune to moisture.

 

CONSUMPT
± 7-10 m² / L (depending on the porosity of the surface)

 

USER MANUAL

Always perform a test first to assess the penetration and result.

For new floors, IN2-DENSIFY L Basic can be applied the day after levelling without pre-treatment. If the floor was covered with foil, curing, stucloper, etc., first clean it well with IN2-CLEAN. The curing compound must be completely dissolved or can be removed with IN2-STRIP.

Spray IN2-DENSIFY L onto the surface until it no longer absorbs anything. Note: distribute well, be sure not to leave puddles.

Allow the product to dry for 12 hours. Do not proceed with sanding or polishing until the surface is completely dry.

Weight N/A
Packaging

1L, 10L, 20L, 120L, 240L, 480L, 1000L

Reviews

There are no reviews yet.

Be the first to review "IN2-DENSIFY L Basic"

Your email address will not be published. Required fields are marked *