FAST-DENSIFY S Basic

Application
  • Hardens the top layer of concrete floors
  • For levelled and polished concrete floors
  • For old and new floors
  • Reduces dust emissions and makes maintenance easier
  • With 9% concentration of sodium silicate
  • From  65,26 excl. VAT

    Always on stock
    Make a choice:
    technical information:

    Article code:

    FAST-DENSIFY S Basic is a water-based sodium silicate with a concentration of ±9% used to harden cement surfaces such as concrete floors.

    The silicate reacts with the cement components and forms an insoluble calcium silicate hydrate (CSH) that increases surface hardness, reduces dust and facilitates maintenance.

    Unlike coatings and sealers the top coat will not peel or soften, and it is immune to moisture.

    Use FAST-DENSIFY S Basic to compact, harden and dust-proof new and existing concrete surfaces to compact, harden and make them dust-resistant.

    Consumption: 7 to 10m² / L (depending on the porosity of the surface)

     

    INSTRUCTIONS

    Make the surface completely dust, grease and stain-free.

    Spray FAST-DENSIFY S Basic on the surface with a Sprayer and distribute with a mop or scrubber. Keep the product moving for 45 minutes with a microfiber cloth.

    Remove with water after 45 minutes. Then you can immediately proceed with sanding or polishing.

     

    Weight N/A
    Packaging

    20L, 12x20L, 24x20L

    Reviews

    There are no reviews yet.

    Be the first to review "FAST-DENSIFY S Basic"

    Your email address will not be published. Required fields are marked *